FAQs | Wet & Forget Shower

Wet & Forget Shower Cleaner is available in a Vanilla Scent and Fresh Scent. Both are very subtle, making them more appealing to those with sensitivities to fragrances.

You will need a sprayer to apply Wet & Forget Shower Refill. Add the contents of the refill to an empty Wet & Forget Shower 64 oz. bottle.

Open the flip cap and firmly insert (white) hose tip until it snaps into place. Once attached, fully extend the hose to 3 ft [36 in]. After each use turn sprayer nozzle to 'OFF' position and snap back into bottle handle to avoid leaks. Once the trigger is connected store and transport in an upright position.

Spray your shower down with Wet & Forget Shower after you use the shower. The next day, simply rinse the surfaces clean with water before showering. Do this once each week to keep your shower spotless. For best results leave on surface 8-12 hours (but no more than 24 hours).

Once the hose tip is snapped into place extend the hose 3' (36 inches). If the hose isn't fully extended the entire 3' it will cause a kink and product will not properly flow through the hose into the sprayer.

Yes. For tough jobs spray Wet & Forget Shower on the surfaces that need cleaning. Let it sit overnight. Before your next shower, rinse the surface and give it a quick wipe-down. If the shower still needs additional attention, apply Wet & Forget Shower each day until clean. Once you've obtained a clean shower you can start your maintenance program of spraying the shower once a week. This will prevent the build-up of everyday shower grime.

We always recommend testing Wet & Forget Shower in an inconspicuous area prior to using. Wet & Forget Shower has been tested on ceramic, natural stone, chrome, brass, bronze, nickel, copper, acrylic, rubber, vinyl, stainless steel, granite, slate, glass tiles, cultured marble, and fiberglass. Wet & Forget is not recommended for use on natural marble.

Yes. Wet & Forget Shower can be used on glass, plexiglass, vinyl, rubber, nylon, and plastic.

Yes. Apply Wet & Forget Shower. Let it sit for a few moments then rinse with water.

No. Wet & Forget Shower was developed with soft chemistry. It doesn't contain harsh or aggressive chemicals like bleach, ammonia, dyes or their irritating fumes.

Yes, it will not affect or interfere with the aerobic or anaerobic bacteria in your septic tank.

Wet & Forget Shower contains two non-aggressive, proprietary non-ionic and cationic surfactants. One dissolves soap scum, and the other targets body oils. This combination gently goes to work, softening and eliminating soap scum and body oils and leaving behind a clean shower and a soothing scent. No scrubbing or wiping required!

No. Wet & Forget Shower will remove surface mold and mildew stains, but not those permanently sealed in silicon or grout.

Yes. If your washing machine has a build-up of soap scum and grime, spray Wet & Forget Shower on the walls of the washing machine and inside the agitator if applicable. Leave overnight, and then run a short wash cycle to rinse the product off. Repeat if necessary up to 3 times. This will dissolve and wash away any build-up.

We recommend cleaning lime/calcium deposits prior to using Wet & Forget Shower. Wet & Forget Shower cleans and prevents the build-up of soap scum, grime, oils. It also cleans mold and mildew stains.

Wet & Forget Shower gently goes to work on contact dissolving soap scum and shower grime. Tough jobs might require a wipe-down prior to your next shower to get the desired results. Wet & Forget Shower continues to clean and prevent new build-up over the next week. With regular weekly use, your shower will remain sparkling clean.